First photoshop layout
On the sidepanels I will place two large QR-codes one pointing to my website and another pointing to facebook.
I don't have a cnc that big so handcutting with a scrollsaw is the way to go. For transferring the letters to the plywood I learned this technique from one of the scrollsawers-blogs. First I draw outline of the letter with my cad-program and then print the drawing on a laserprinter. The drawing is then placed with the printed side facing the plywood. Then the paper is soaked with zylene and rubbed with a soft cloth. A photocopied drawing can be used too.
The drawing can be seen through the paper.
And pattern ready for scrool-sawing. The zylene evaporate without any signs on the wood.
I have also used this technique for miniatures for both sawing and carving. Much easier than using transferpaper.
After a few hours scroll-sawing here is the result. Ignore the letters isn't on a straight line :-)
The dots after N and J should be a little larger. Next is a paint job.
And a first floor view of our garden. In the background is another real size project I have promised to finish this week-end. Removing old paint from a door and then repaint and giving some oil to the garden chairs
Have a nice week-end
Niels
